Structuring Channel Discounts for Software and Technology Companies

Selling through sales and distribution channels of various types is very important to many software and tech companies. Yet channel programs, and specifically discount structures, are often thrown together quickly and haphazardly, without looking at any real hard data. Let's examine some of the key items it's advisable to consider, when structuring a channel discount program:

Market Norms
The absolute first place to start when considering channel discounts is to survey the SPECIFIC market that you are entering. By this I mean look at similar products through the EXACT profile of channel partners you are considering selling through. For example for consumer software, retail margins of 15-18% are common, whereas for a specific VAR segments the discount norms may be in the 25-40% range. If your discounts fall too far below the market norm, your program will likely fail. If discounts are set much higher than the market norm (without good reason), your company will be leaving considerable profits on the table. It is very important to do upfront research on actual conditions in your segment--don't just "assume"! Preferably, you want to find out what your direct competitors are offering in terms of a channel program. This may seem obvious. But in my consulting practice at PJM Consulting, instead of using objective data, I see significant numbers of companies use their own theories about what the right discount structure SHOULD be from their perspective. This often ends up being the main reason for a painful "restart" of their channel program at a later date.

Product and Pricing Strategy (Street Price)
Channel discount structures cannot be constructed in a vacuum. They are but one component of your overall product and distribution strategy. As such, they must be consistent with the overall goals you establish for the product. If you are seeking to penetrate a new market or a new channel, it may be wise to be more aggressive than the market norms to gain market share and shelf space. If your market is more mature and you are in a harvest mode on a particular product line, it may be wise to minimize channel discounts to maximize profitability. In any event, consider channel discounts early in the product planning phase as part of your overall product pricing strategy.

Type of Channel
There are many different types of partners for software and tech companies that fall into the category of "channel resellers". Computer retail, mass market retail, Value-Added resellers (VARs), Systems Integrators (SI), Domestic Distributors, International Distributors, Manufacturers Reps--and many more. Each of these reseller types are quite different from the others, and each add different types and levels of value to your distribution systems. Yet every one that you distribute through will be competing with the others (as well as your direct sales model), at least indirectly.


Multi-Channel Pricing Equity
It's important if you are selling through more than one channel (including direct sales) to attempt to equalize, as much as possible, the street prices charged by the various channel types. The best way to do this is to consider the costs incurred by the various types of resellers in delivering your products to the target customer. For example, a VAR that provides support, pre-sales consulting and other services may need a higher level of discount to achieve an adequate profit margin than a retailer that simply is providing shelf space might. In reality, the retailer is likely to have a lower street price, but it is important to try to minimize this gap. Otherwise the VAR who may be providing important services to a segment of your customers may be driven out of the market, and refuse to sell your product--which is not in your company's interests. The most common practice which causes inequities in channel pricing is a volume-driven discount model. New entrants to the channel often use this approach--why wouldn't you want to incentivize volume sales by giving the biggest discounts to the largest volume sellers? Although this may work fine if you have a monolithic reseller channel, where all the players have the same business model and offer the same value add, it otherwise will quickly cause the problems discussed here. The resellers possessing the lowest cost structure and providing the lowest value-add will quickly dominate the market, driving the high-cost/high value-add resellers away. This may be ok with you; just make sure you explicitly consider this possibility before embarking on a volume-driven channel discount strategy.

Value Added
One of the things that I recommend considering explicitly up front is: what is the key value-add that you are seeking from the channel? Is it pre-sales consulting, installation services, post-sale support, shelf space and inventory for immediate customer access, or one of many other factors? Make sure you understand what channel value-add is most important to you, and build protections into your discount structure for the reseller type who best provides this value.

Components of Discounts
It's not always necessary (or wise) to offer a single, monolithic discount level for resellers. How you structure your discounts components should be closely tied to your product and pricing strategy--what you are trying to accomplish with your overall channel strategy. For example, if you are trying to manage your street price at a certain level, it can be dangerous to offer a large discount to certain types of resellers who may pass that discount on as a lower street price. Yet this segment of resellers (for example, retailers) may be an important, high volume channel for your product type. In this case, it may be wise to offer additional, conditional discount for activities that you value. Again as an example, to keep your street price up but incentivize a high level of activities through retail, you could offer a high level of added discount for approved co-op marketing activities. A segmented discount structure driven by costs and value-add, rather than volume, is often the most effective structure to maximize multi-channel sales. This will also limit discount-driven reductions in street price, which ultimately can severely reduce profit levels and incentives to sell for both the vendor and all channel partners--if not properly controlled.


SUMMARY
Creating a Channel Discount Strategy and structure is NOT a theoretical exercise. It should be primarily a tactical exercise based on a realistic view of market conditions, and include collection and analysis of objective market data. While what you hope to accomplish with your discount strategy is important, the overwhelmingly most important factors in creating your discount strategy should be what is happening in your segment of the channel--and what will work best for your company. Try not to create a structure based on what you'd like to see with respect to the channel. Focus on creating a pragmatic, workable strategy upfront, to avoid an unsuccessful channel entry and painful restructuring that results. If you are new to the channel game, seeking outside assistance may help you avoid experiencing one of these painful false starts that happen frequently in the channel.

That's my view of how best to create a channel discount structure. I welcome you to post a comment with your own thoughts on this important technology management decision.

Phil Morettini
PJM Consulting
www.pjmconsult.com

Trade Shows for Software & Technology Firms - Do They Still Make Sense?

Let's talk about what, for some people, is a marketing method from a bygone era: Trade shows, or Trade Fairs, as they're referred to in most places outside of the US.

At one point in time, Trade Shows were a staple in most every tech company's marketing budget--shows like Comdex, PC Expo, Network World and a host of others were annual rites of passage. But in this Internet age, they have been greatly reduced in the marketing mix, if not taken completely out of the picture.

There are many reasons for this. First and foremost, the ROI of tradeshows was always very questionable for most exhibitors. In marketing departments everywhere there were sharp discussions during budget time, on whether to continue the expense of the major shows. They always seemed important to be at, but usually it was pretty difficult to make a direct correlation to enough actual revenue, to justify the large expense. As the Internet became more prominent, this ROI looked even worse in comparison--as it did for many other "offline" marketing methods, such as traditional direct mail and print advertising.

So are tradeshows now obsolete? Probably not, but many marketing folks might say that they are on the endangered species list. So when, if at all, do traditional trade shows still make sense today? And what should your goals be, if you do decide to invest in a show or two? Let's take a quick look at 4 points relevant to each of these two questions.

4 REASONS IT MAKE SENSE TO GO TO A TRADE SHOW

A CONTRARIAN APPROACH
One of the major enduring tactics of marketing is to "zig when your competitors zag". If you are in a market where a show is still well attended, but vendors are starting to stay home rather than pay for booths, you may have an opportunity. If your competitors aren't there, you have a larger, captive audience of prospects to strut your stuff to. One of the basic tenets of a good marketing program is to find a "communications channel" which isn't too crowded. With trade shows falling out of favor in marketing budgets, there is potential to benefit from a contrarian approach in some markets.

INTRODUCTION INTO A NEW MARKET
This is always one of the strongest reasons to attend a few shows. If you have a brand new company, or your company is entering a market space it hasn't previously participated in, a couple of well-selected shows can be a very good investment. Remember, you only get one chance to make a first impression.

INTRODUCTION OF A NEW PRODUCT
Much like a company entering a new market, a new product introduction is a very traditional reason to exhibit at a trade show. In my opinion, introducing new products at shows has historically been over-estimated as a marketing tactic. Sure, the press is there covering the show, but if 50 other vendors are also announcing new products, your new product might get lost, or at least get less press coverage then if you announced two weeks before or after the show. Remember the comment above about over-crowded communications channel?. In some cases, announcing at a show fits this description. This can still be a very sound marketing tactic--just do careful research and planning to ensure it is a net positive.

IMPORTANCE OF HIGH TOUCH
If you have a product that absolutely requires some hands-on or personal selling before prospects buy, trade shows can be an excellent investment. For example, if the product is quite expensive, or an expert demo sells far more than prospect downloads from your site. I have a software company client at PJM Consulting who is in a market where expert demos are essential; they have grown the company, to a great extent with trade shows, and almost always can demonstrate a profit on their show budgets.

4 GOALS TO ENSURE A HIGH RETURN FROM A TRADE SHOW

PRESS COVERAGE
This is always one of the most important reasons to go to many shows. If it is an important show, the press will be there in full force. You really need to plan PR tactics ahead of time, however, as all of the other exhibitors have the same goal of getting press appointments and coverage. It is CRITICAL to plan far ahead in securing appointments with target editors, and have a "tease" of substantial news to obtain the appointment. Editor's schedules fill up far in advance. Properly planned, the show can pay for itself here by eliminating the need for a dedicated press tour. But if not well planned, you will end up "wasting" your product introduction or other news, resulting in little or no press coverage.

EFFICIENCY OF INDUSTRY NETWORKING
Networking with the other exhibitors is often overlooked by many vendors. The focus is generally solely on customers, and maybe distribution channels. Often many companies with complementary offerings are attending exhibiting, along with a few competitors. This can be a great arena to begin or continue discussions with potential strategic partners. At a minimum, makes sure to set aside some time to walk the show floor, and see who might have synergy with your company. Even if you're pressed for time, shake a few hands and gather some business cards--it can be an excellent setup for future discussions.

LOCAL CUSTOMER VISITS
This is also an area that holds potential to lift your show budget's ROI, which is often overlooked by many exhibitors. You are flying staff to a faraway city--why not go in a couple of days early, and call on a few potential major customers? At a minimum, make sure you get those free show tickets that often go to waste out to local prospects in your database, so they can come to the show for a meeting or demo at your booth.

LOCAL CHANNEL VISITS
In the same vein as visits to customers, it makes a lot of sense to call on current or potential channel partners, once you decide you'll be spending money going to a show in a certain region. Add a couple of days to your trip and visit a few key partners and prospective partners in the area. And make sure to invite them to the show well in advance and supply those free tickets, so you can see many more later at your booth.


SUMMARY
If you just fly to a city, set up your booth, and wait for new customers to flock by to see you--you are likely to be very disappointed in your return on investment. But if you use a tradeshow as a hub for a variety of related activity, adding a couple of key shows into your marketing mix can still bring a very nice ROI. The key is preparation and planning, to make sure your results are optimized. I've outlined a few reasons why it may make sense to exhibit at tradeshows/trade fairs even today, along with some ways to maximize your return. What's your reason for attending tradeshows in the Internet Age? And what concrete results do you hope to achieve? Post a comment to continue this discussion.


Phil Morettini
PJM Consulting
www.pjmconsult.com

Negotiating and Working with Large Technology OEM Partners

The Holy Grail for many software and technology companies, especially the early stage type, is the big deal. Everyone is looking for the big deal, the one that will fund the company's early activities, provide market credibility and momentum in the marketplace. Of course, if it goes well, there can be nothing better. Many times the big deal takes the form of an OEM partnership with a much larger company. But often when these deals do happen, they end up fitting in the category of "be careful what you wish for".

TARGET YOUR OEM PARTNERS CAREFULLY
This is where it all starts, good or bad. It's important to pick compatible partners. Companies looking for large OEM partners are often blinded by the potential of what the OEM can do FOR their business. They often fail to pay any attention at all to what the OEM might do TO their business!

Can the partner cause severe channel conflict? Will they tie the small company up in endless meetings, procedures and negotiations? Do they have a corporate structure and culture so foreign to your way of doing business, where you end up pulling your hair out from frustration--unable to accomplish even the most simple business objective without moving mountains? Sometimes with large companies, its difficult even figure out who you need to speak with--let alone get a prompt, unambiguous answer.

Get to know your partners well before you sign a deal. It's tempting to rush in before "they change their mind", but the actual relationship is critical to potential success. It's like dating before a marriage--no matter how attractive the partner is, you need to make sure you can live with them later on.


NEGOTIATE FROM STRENGTH
I don't like to do deals with people that are sure they have the upper hand. If they think they can push you around--they almost certainly will. Usually one partner needs the other to a greater extent, but you want to try to avoid dealing with partners where you have no leverage at all. It generally doesn’t' turn out well. Make sure that you negotiate a deal that you can live with. Above all, you need to have a "line in the sand" that you won't cross--and be prepared to walk away if the negotiations cross that line.

This can be a painful and difficult thing to do when you are seeing big "dollar signs" in your eyes--and fear if you stay strong, you might blow the deal. But remember, you have something that the other side wants as well--or they wouldn't be talking to you. If you don't know what your minimum successful deal looks like, and you aren't prepared to walk, you may sign a deal that you will regret. Not to mention tying up your time and resources, which might have been used working with a more compatible partner.


WORK ON EVEN TERMS
Once you've negotiated a deal that you can live with (and hopefully prosper with!), it's time to get to work with your partner. Try to keep things as fair and even as possible in the relationship. Of course, it's important to be accommodating to your partner, and respect the differences in operational procedures. Big OEMs will usually move slower than you, be more process-oriented and structured, and include more people in the relationship. All of this is fine, but it needs to be tempered so that the larger partner doesn't "swallow all of you available resources whole". It can easily happen if you don't guard against it. They have more resources than you (but will always think they are busier!) as well as more process-driven requirements that need to be met. But don't be afraid to draw the line at a reasonable point, and remind them that you have fewer people and resources available. Suggest a phone meeting instead of flying three people across the country--ask that they come to your place, rather than always trekking to their headquarters. Propose that one of there folks spearhead writing that joint position paper, instead of some scarce resource in your company--you get the picture. Sometimes larger companies will smother you without even knowing they are doing it--don't be afraid to remind them that you need to do business a little differently.

KNOW WHEN TO SAY "NO"
If you've tried everything you know, politely, to keep the relationship equitable and reasonable--but it just isn't--don't be afraid to say NO. I meet many smaller company executives in my consulting practice whojust don't feel they can do this with a larger partner. They'll talk tough in internal meetings, but when back in discussions with the partner, the tough talk turns to submission. They just feel like the partner is too important to their business to risk ever offending them in any way. That attitude is a prescription for servitude for your company. I'm not suggesting being unpleasant; in fact, when standing up to a larger partner, it's critical to be calm, polite and non-defensive. But by all means be firm in delivering the message of what your business can, cannot--and won't'--do. If you don't, what could be a profitable relationship can turn very sour.


HAVE REALISTIC EXPECTATIONS
The last point I'd like to convey is that it's important to have reasonable expectations in partnering with large OEMs. Many companies go into these deals believing they will be "company-makers". In my experience, this rarely happens. Understand what the OEM can do for you, and build your business model around the most conservative projections of their performance that's possible.

Companies usually turn to OEM products from partners to fill niches that they don't fully understand, or don't feel would pay back--if they invested in developing it themselves. It is very rare for products licensed or resold from partners to get anywhere near the push that internally-developed products do. Be realistic about this, and you won't be disappointed. If revenue exceeds your conservative expectations, you'll be overjoyed.


SUMMARY
That's my condensed advice on working with the big software and technology OEMs of the world. This is a common activity for many companies--what's been your own experience? Post a comment and let me know your own view.

Phil Morettini
PJM Consulting
www.pjmconsult.com

Channel Pricing Strategy for Software and Hardware Products

Pricing software products is always a difficult exercise. With high product development costs, but near zero costs of goods sold, there are many different strategies that people have followed successfully (and not so successfully!) over time. Pricing hardware products is a bit simpler because there is generally a significant cost of goods sold that acts as a governor on pricing behavior. But even with hardware, technology markets are dynamic and fast moving. And it's a complex enough topic when all sales are going direct--once you bring channels into the picture, it only gets worse.

CHANNEL CONFLICT
The biggest concern most companies have when pricing for multiple channels is channel conflict. I have seen many companies who actually AVOID selling through channels for fear of the pricing implications it brings. They are afraid of a channel undercutting their direct sales force in price, and channel conflict in general, which arises as a result of different prices being presented to customers from representatives of different channels. But this doesn’t have to be so; with a savvy understanding of the implications of pricing actions. This comes from both experience, and "paying attention to what actually HAPPENS in the marketplace. If you price properly and run your channel programs well, you can sell successfully via multiple channels--with these channels living in relative harmony.

VALUE-BASE CHANNEL PRICING
I've written about value-based pricing before, in the context of the perceived value of a product, as seen by the end-user, being the guidepost for pricing actions. A similar concept exists for channel discounts. Rather than taking a simplistic approach and give the greatest discount to the channel players that move the most product ( a destructive strategy--more on that later), it's important to measure how much "value" a particular channel provides both you and your end-user customers. Look at things like 24/7 support, inventory & product availability, technical expertise, credit services, and the like. In this case, it is helpful to let the cost of delivery of each of these attributes be your guide to the value they provide.

VALUE-BASED CHANNEL DISCOUNT STRUCTURE
For example, you may figure that the cost of a VAR providing 24/7 support to end users (meaning YOUR company doesn't have to) is equal to 5% of the list price of the product. And the inventory held by a retailer (again, meaning YOUR company doesn't have to hold it, at a cost) is equal to 2% of the list price. And so on and so forth. Using this value-based method, you can calculate the actual costs borne by your partners in delivering marketplace value, and use this as a guidepost in building your channel discount schedules for various types of channel partners. This value-based channel pricing approach is not well-known, and seldom considered; most people seem to figure the only value worth extra discount is sales volume. If you use a value pricing approach, you actually have a chance to build a multi-channel strategy that "clicks on all cylinders" by providing discount structures that are equitable based upon cost and value associated with each channel.



LIMIT VOLUME DISCOUNTS
If you choose the "more volume=greater discount approach, your multi-channel strategy is a house of cards which will soon collapse around you. One channel will quickly grow to dominate, and the other channel types will soon quit selling on your behalf, and wither away.


THE GOAL IS TO MAXIMIZE SALES THROUGH ALL CHANNELS
Again, the key is to not let one channel dominate. Ideally, you would like all channels to be presenting prices to the end customer that are equal. In reality, that pretty much can't happen without price fixing (which some folks may be able to get away with, but that's another story….). But you should strive as much as possible to have end user pricing equity for all channels. But this is where the counter-intuitive part of this discussion comes in to play. Most people pricing high tech products have a tendency to price based upon the volume of product a particular channel player can move. It seems logical--why wouldn't you want to incent and reward a partner with better margins if they are selling more products?

While this appears logical, it is actually penny-wise and pound-foolish. In fact, it is usually catastrophic to your plans to maximize sales through multiple channels. Let's look at a simple case of how this often "breaks" a multi-channel strategy for a common case: a vendor selling through both retailers and VARs.

A SIMPLE EXAMPLE
Retailers provide a vendor with a point of purchase holding inventory, where their customers can go to immediately purchase a product. VARs often don't hold inventory, but provide other services important to the vendor and some customers, such as tech support, training and integration with other software and hardware products. Each may have an important role to play in the overall strategy to maximize vendor sales.

But the retailer will usually be a high volume partner, with the VAR less likely to be a volume outlet (although the VAR CHANNEL, in total, may hold great promise to move volume). If you structure your pricing by volume, the retailer will get better discounts. Because individual VARs generally have higher costs spread over lower product volumes, they actually need HIGHER discounts to stay even in pricing potential to the Retailer. This situation is exacerbated by the fact that retailers tend to be volume-oriented, usually accepting a relatively small, fixed margin on everything they sell. If you provide discounts based upon the volume that a partner moves, what will happen is inevitable: The retailer will take over your channel business, because the VARs will be "squeezed out" by the relatively low prices charged by the retailer. They won't be able to make a profit on your products, so they will ignore the business, and you will lose the opportunity to realize significant sales through the large (in aggregate) VAR channel, especially those customers that desire the service and support they supply. I am oversimplifying this situation, of course, because VARs are more interested in the service revenue that a product can pull, than they are in product margins. But I have seen this scenario play out many times and kill product sales through VARs channel that might otherwise generate health sales through that channel. This can be a heavy penalty for naïve technology product managers who are charged with pricing their products and moving them through multiple channels, but who don't fully realize the consequences of their actions.

SUMMARY
Pricing seems pretty simple on the surface--when channels are involved, it's anything but. It's important to fully think through the downstream effects of your pricing policies when multiple distribution channel are involved. Let me know if you have questions, or you own channel pricing stories that you'd like to share.

Phil Morettini
PJM Consulting
http://www.pjmconsult.com/

Selling Through OEMS

I've recently discussed selling through VARs as a distribution channel strongly favored (maybe a bit too much!) by many early stage technology and software companies. In this article I'm going to look at another channel that is often misunderstood and misused: The OEM channel.

When a company goes about it the right way, OEM business can be an excellent additional revenue source for startups--and any high tech company, for that matter. Where I want to throw out a caution flag, is when a company decides they are going to rely on OEMs as its primary--or only--channel.

Now this can work, you might say. And you would be right. But in most cases, I believe, it isn't the best way to proceed. It can work, if you have the right type of product, and you've thought your strategy through very thoroughly. The problem is with most companies, this the usual scenario. What I find more prevalent is the old "let's make it, and we'll get someone else to sell it for us" approach. As I've discussed before, 'let someone else sell it' almost never works. This sentiment often occurs with a technology-driven senior team, without a good feel for marketing or sales. The natural tendency in these situations is to avoid the current weaknesses in this organization, and "let somebody else do it".

The problem here is that sales and marketing needs to be a core competency, in most situations, if a technology company to become as successful as possible.

So what are the "bad effects", when an early stage technology company pursues OEM relationships as their sole distribution strategy--or at least "too early" in their company development?

EFFECTS OF "BAD" OEM STRATEGY

No Leverage
If you approach potential partners with a brand and existing sales, there is no leverage in negotiating with the larger, more established OEM prospective partner. In addition, it's a much harder sale, because your company and product don't have a track record.

No development of internal sales & Marketing
Companies with OEM-only business models tend to have weak (or nonexistent!) sales and marketing departments. My belief is that sales and marketing is a core competency--making this a bad idea. While you can run a company this way, in most cases, the ultimate size and profitability will likely be a fraction of what your technology could have otherwise supported.

All push, no pull
Every sales and marketing activity works better if there are "pull" elements, in addition to "push". If selling to the OEM is almost solely a "push" activity, with no brand or your own market share to help pull--the process is much harder.

All the eggs in one basket
Even if you do well and gain OEM deals with premier partners--success is far from guaranteed. It isn't unusual for OEM deals, especially early ones, to yield actual revenues in the 10-15% range of forecasts. If this happens to you and you've built your company around these projections--you're basically screwed. You risk "crib death" or at least a difficult restart with your own brand, due to the disappointing sales from the OEM relationship(s).


Your OEMs swallow you whole
A very common scenario is a much larger OEM that starts treating its small, entrepreneurial partner like another department in its bureaucracy. The OEM stunts your overall company development by "tying up" the scarce resources of your smaller company in meetings, special projects, ever-changing product development requirements--and yes--more meetings.


Given the potential pitfalls, how do I recommend using OEMs?

THE "RIGHT WAY" TO INCORPORATE AN OEM STRATEGY

Develop your own brand/channel first
Pursue OEM business only AFTER you've established products under your own brand. It not only will provide you with a product that will be more attractive and stable to potential OEM partners, but you've got your own branded business to sustain you

Important--but secondary--revenue source
Treat OEM business as an important, but secondary revenue source relative to your own brand. This will keep things in perspective and prevent you from putting your company's future in someone else's control.

Bundle rather than integrate
Once way to take advantage of large OEMs without the downside of losing your own identity is to seek bundling deals, rather than private label deals. By doing this you are essentially co-branding, building the power of the partner brand through affinity with the bigger company. This leaves you with greater marketing, selling and support requirements, but may lead to a larger, more profitable company in the long run.

Address a vertical out of your reach
A good way to utilize OEMs is to fill a key vertical where your technology has a market. This occurs when you decide that you can't address this vertical well with your own brand, because you don't have a presence, and have decided that it doesn't make sense strategically to expend resources to develop one.

Final harvest
Another smart way to use OEMs is to "harvest" a volume product which is now in decline, and is a product which you don't intend to continue major investments. If you can get such a deal, it can be great way to maximize end-of-life revenue with minimum incremental investment.

Offer another price point
A strategy that can be used successfully in some cases (but is a bit dangerous) is to use an OEM to offer another price point in the market, one that you choose not to address with your own brand. More often you would do this with your own alternative brand or sub-brand. But there are instances where this investment might not make sense. Special care should be taken if the OEM is to fill a lower price point--care needs to be taken so that your own brands share isn't eroded significantly.

Integration with complementary products
There are some instances in the marketplace where 1+1 does indeed equal 3. In these cases it may make sense to team with an OEM, to gain the advantages of product integration with a key product in your market, offering them as a single, integrated solution.

Leverage your IP into a new market
There are also cases where you main technology base can be easily used to create an entirely different type of product, which is intended to serve an entirely different market, relative to what you are selling under your own brand. In these cases it may make sense to team with an OEM in this disparate segment, to market this spin-off product from your main technology.

Summary
The bottom line is that OEM marketing is very important in the software and technology business. I strongly recommend that most everyone pursue this type of business; however, do it as part of a balanced, overall revenue strategy. Tread carefully and wisely and this may be the distribution channel that makes a break-even, or modestly-profitable business, into a profitable winner. It's easy to say you want OEM revenue, but like most things in business, doing it right is hard--the devil's in the details.

That's my thoughts about how OEM strategy best fits into a typical high tech business. Post a comment and let us know how YOU approach OEM relationships--I look forward to your opinions.

Phil Morettini
PJM Consulting
http://www.pjmconsult.com/

Marketing and Selling Technology Products through the Value-Added Reseller (VAR) Channel

Selling through multiple channels is one of my preferred strategies in technology marketing. If done properly, it allows a company to fully exploit its expensive, hard-earned intellectual property to the maximum extent. One of the most popular channels (and one of my favorites) used to sell B2B software and hardware is the Value-added Reseller, or VAR channel.

VARS ARE THE DISTRIBUTION HOLY GRAIL FOR MANY STARTUP COMPANIES

In fact, with a great many startup software and technology companies, building a VAR channel network to sell their companies products is the first thing they want to do, upon releasing their first product. This is especially true when the founding management team primarily comes from a technical background. The thinking goes; they are technologists who have created a great product. They don't have a lot of experience selling or marketing--and most of the startup money has gone to, and will continue to go to developing products. Why not just recruit a bunch of resellers to market and sell their product for them? Sounds like a great idea on the surface, doesn't it?

Unfortunately, there are few strategies that are more flawed, and which have continuously led to failure than this one.

Let's contrast the realities of the VAR channel, against this simplistic notion that has been tried again and again, without success:

WHAT VARS DON'T DO

1) First of all, VARs DON'T market. At least not YOUR products, anyway (they may market their services). So the very first flaw in this strategy is that it is based on a gross misconception of what a VAR typically does.

2) VARs don't create new markets. VARs are great at selling into established markets and further expanding already growing ones. Missionary sales: brand new markets, categories and products? Not so much.

3) They don't sell a wide variety, or a large assortment of products. In fact, VARs are focused on actively selling VERY FEW products--if they are even focused on selling products at all.

4) VARs aren't motivated by high product margins.

5) The individual VAR does not exist to help YOUR company make money.

Now if you're not a sales or marketing professional with experience working with the VAR channel, you're probably very confused by the list just above. So what is it that VARs actually do? And why is it worth dealing with them at all!

What happens time and time again is that a technologist startup CEO will pursue the VAR channel as their exclusive distribution channel, without knowing any of the points in the list above. Their effort will fail miserably, and they will then scramble to begin selling their product directly, or through some other means. They will swear off the VAR channel forever, and I do mean swear:

"Those !!@#$%^^* resellers are good for nothing. They take a big cut of your margins, while adding no value in return. I'll never deal with them again."

I can't tell you how many times I've heard some version of the quote above.


But the VAR channel is a major force in the technology business, and if you know what you're doing, it can be used to great leverage by your company. So let's now take a more realistic look at what VARs CAN DO:

WHAT VARS ACTUALLY DO

1) First and foremost, VARs are in business to sell their own HIGH MARGIN SERVICES. That is why they exist, and how they put bread on the table. This revelation may be discouraging to some product vendors, but you must understand and respect this above all, if you hope to leverage this channel. The only exception to this is the "core" product, which will be discussed later in this article.

2) VARs are very interested in things that apply to their own vertical focus. Although it wasn't so true many years ago, most successful VARs these days have a very tight vertical focus.

3) Many VARs act as "thought leaders" for their corporate customers. So they are very interested in "what's new" in the market, so they can stay on top of trends and remain market experts for their clients. This means that they will sometimes spend a lot of time talking to you about your new product, but never find the time to actually "sell" it (even if they have the best of intentions). In the busy world of the small VAR, client demands and selling the core product and services usually soak up all excess time.

4) VARs are often used as "aggregators" of purchases by corporate clients. This way, the corporation can use a single vendor point of contact for their technology purchases, greatly simplifying their purchasing process. They can also leverage the VAR as an evaluator/validator of new products and technologies. This makes them a very important part of the purchasing chain for many corporations.

5) If they put any real effort into selling products at all, it is usually into one or two "core" products that they have built their service offerings around. If you aren't a product that pulls services, forget about getting high mindshare with the VAR.

6) When it comes to selling "non-core" products, VARs are almost completely driven by the demand they see in their installed customer base. They won't often add in new products that they don't see a demand for, unless they are really techie, early adopter types. And these techies will often add a product, but never find time to actually offer it (let alone sell it) to their customers.

7) The VAR channel is EXCELLENT at fulfilling demand for great new products into their existing, installed customer base.

8) VARs can be an excellent proxy for a vendor in installing, configuring and offering first level support. This can enable a vendor extend its reach and to leverage the VAR channels existing infrastructure rather than building out a large field organization (which depending on the product category, may not even be feasible).

So given the points outlined above, what are the "best practices" to follow when you are seeking to build and leverage a VAR channel?

VAR CHANNEL BEST PRACTICES

*Always sell your new product directly in the beginning. Even if you don't plan to build a direct sales force and sell directly in the long run, it is critical to establish that the product works, and can be sold successfully. If you can't sell your own product, no VAR will be able to either (and few smart ones will be willing to try). De-bug and systemize the sales process, make sure that your end user price points are right, and build a small reference account list--at a minimum. Only at this point should you begin to approach VARs to distribute your product.

*Marketing the product is the vendor's responsibility. Do not naively think that the VAR will market the product for you, or that since you have VARs to sell, you don't need to market at all. Remember, VARs are great at fulfilling demand among their existing customers--and very poor at creating it among new customers. The vendor must position its products in the market and create demand for them--otherwise your channel efforts will certainly fail

*Treat VARs like the valued business partners they should be. If you do sell direct, don't "steal a deal" and take it direct just to make a few more points on one sale. Nothing is more short-sighted. Not only will this VAR not do business with you again, in any given vertical it's a small community--and word gets around fast. You risk becoming a pariah in the VAR channel, and losing all the hard work that you put into building your network. My philosophy is: when in doubt, cut the VAR in on the deal. If you don't feel he's adding any value to your business, eliminate him from your network after the deal. But don't use your low opinion of a particular VAR to convince yourself to cut him out of the deal. You risk cutting off your own nose in spite.

*Be realistic in what the VAR channel can do for you. If you have a non-core offering, be happy that they "make it available" to their customer base, rather than expecting them to sell it actively. Remember, VARs are key influencers of their clients; just being available to endorse your product as something they offer, to a customer that hears about the product elsewhere, can be very valuable.

*Provide a reasonable margin, but don't "throw margin away" thinking that it will motivate a VAR to actively push your product--if they otherwise would not. It won't work, and you'll just be giving away money for no reason--that you could use creating demand instead.

*For most products, make sure that you don't over-distribute by signing up more VARs than your market will support. Even though greater margins might not make a VAR push your products, the erosion of margins to near zero will cause a VAR to eliminate your product from their portfolio. It's better to leave a few deals on the table, than to risk demotivating your entire reseller network, because they are 6 competitors are bidding on every deal in an particular area. The exception to this is if you represent a "core" product that pulls significant service revenue, you can get away with a lot more stuff, because the product margins are trivial to the VAR compared to the lucrative service revenue. But in this case, be careful when using your market strength to abuse partners. People have long memories, and "what goes around, comes around."

SUMMARY

That's my primer on how to approach, and even more importantly, how NOT to approach doing business with Value-Added Resellers. Post a comment or send me an email to delve into this important topic further.

Phil Morettini
PJM Consulting
http://www.pjmconsult.com/