Structuring Channel Discounts for Software and Technology Companies

Selling through sales and distribution channels of various types is very important to many software and tech companies. Yet channel programs, and specifically discount structures, are often thrown together quickly and haphazardly, without looking at any real hard data. Let's examine some of the key items it's advisable to consider, when structuring a channel discount program:

Market Norms
The absolute first place to start when considering channel discounts is to survey the SPECIFIC market that you are entering. By this I mean look at similar products through the EXACT profile of channel partners you are considering selling through. For example for consumer software, retail margins of 15-18% are common, whereas for a specific VAR segments the discount norms may be in the 25-40% range. If your discounts fall too far below the market norm, your program will likely fail. If discounts are set much higher than the market norm (without good reason), your company will be leaving considerable profits on the table. It is very important to do upfront research on actual conditions in your segment--don't just "assume"! Preferably, you want to find out what your direct competitors are offering in terms of a channel program. This may seem obvious. But in my consulting practice at PJM Consulting, instead of using objective data, I see significant numbers of companies use their own theories about what the right discount structure SHOULD be from their perspective. This often ends up being the main reason for a painful "restart" of their channel program at a later date.

Product and Pricing Strategy (Street Price)
Channel discount structures cannot be constructed in a vacuum. They are but one component of your overall product and distribution strategy. As such, they must be consistent with the overall goals you establish for the product. If you are seeking to penetrate a new market or a new channel, it may be wise to be more aggressive than the market norms to gain market share and shelf space. If your market is more mature and you are in a harvest mode on a particular product line, it may be wise to minimize channel discounts to maximize profitability. In any event, consider channel discounts early in the product planning phase as part of your overall product pricing strategy.

Type of Channel
There are many different types of partners for software and tech companies that fall into the category of "channel resellers". Computer retail, mass market retail, Value-Added resellers (VARs), Systems Integrators (SI), Domestic Distributors, International Distributors, Manufacturers Reps--and many more. Each of these reseller types are quite different from the others, and each add different types and levels of value to your distribution systems. Yet every one that you distribute through will be competing with the others (as well as your direct sales model), at least indirectly.


Multi-Channel Pricing Equity
It's important if you are selling through more than one channel (including direct sales) to attempt to equalize, as much as possible, the street prices charged by the various channel types. The best way to do this is to consider the costs incurred by the various types of resellers in delivering your products to the target customer. For example, a VAR that provides support, pre-sales consulting and other services may need a higher level of discount to achieve an adequate profit margin than a retailer that simply is providing shelf space might. In reality, the retailer is likely to have a lower street price, but it is important to try to minimize this gap. Otherwise the VAR who may be providing important services to a segment of your customers may be driven out of the market, and refuse to sell your product--which is not in your company's interests. The most common practice which causes inequities in channel pricing is a volume-driven discount model. New entrants to the channel often use this approach--why wouldn't you want to incentivize volume sales by giving the biggest discounts to the largest volume sellers? Although this may work fine if you have a monolithic reseller channel, where all the players have the same business model and offer the same value add, it otherwise will quickly cause the problems discussed here. The resellers possessing the lowest cost structure and providing the lowest value-add will quickly dominate the market, driving the high-cost/high value-add resellers away. This may be ok with you; just make sure you explicitly consider this possibility before embarking on a volume-driven channel discount strategy.

Value Added
One of the things that I recommend considering explicitly up front is: what is the key value-add that you are seeking from the channel? Is it pre-sales consulting, installation services, post-sale support, shelf space and inventory for immediate customer access, or one of many other factors? Make sure you understand what channel value-add is most important to you, and build protections into your discount structure for the reseller type who best provides this value.

Components of Discounts
It's not always necessary (or wise) to offer a single, monolithic discount level for resellers. How you structure your discounts components should be closely tied to your product and pricing strategy--what you are trying to accomplish with your overall channel strategy. For example, if you are trying to manage your street price at a certain level, it can be dangerous to offer a large discount to certain types of resellers who may pass that discount on as a lower street price. Yet this segment of resellers (for example, retailers) may be an important, high volume channel for your product type. In this case, it may be wise to offer additional, conditional discount for activities that you value. Again as an example, to keep your street price up but incentivize a high level of activities through retail, you could offer a high level of added discount for approved co-op marketing activities. A segmented discount structure driven by costs and value-add, rather than volume, is often the most effective structure to maximize multi-channel sales. This will also limit discount-driven reductions in street price, which ultimately can severely reduce profit levels and incentives to sell for both the vendor and all channel partners--if not properly controlled.


SUMMARY
Creating a Channel Discount Strategy and structure is NOT a theoretical exercise. It should be primarily a tactical exercise based on a realistic view of market conditions, and include collection and analysis of objective market data. While what you hope to accomplish with your discount strategy is important, the overwhelmingly most important factors in creating your discount strategy should be what is happening in your segment of the channel--and what will work best for your company. Try not to create a structure based on what you'd like to see with respect to the channel. Focus on creating a pragmatic, workable strategy upfront, to avoid an unsuccessful channel entry and painful restructuring that results. If you are new to the channel game, seeking outside assistance may help you avoid experiencing one of these painful false starts that happen frequently in the channel.

That's my view of how best to create a channel discount structure. I welcome you to post a comment with your own thoughts on this important technology management decision.

Phil Morettini
PJM Consulting
www.pjmconsult.com

Trade Shows for Software & Technology Firms - Do They Still Make Sense?

Let's talk about what, for some people, is a marketing method from a bygone era: Trade shows, or Trade Fairs, as they're referred to in most places outside of the US.

At one point in time, Trade Shows were a staple in most every tech company's marketing budget--shows like Comdex, PC Expo, Network World and a host of others were annual rites of passage. But in this Internet age, they have been greatly reduced in the marketing mix, if not taken completely out of the picture.

There are many reasons for this. First and foremost, the ROI of tradeshows was always very questionable for most exhibitors. In marketing departments everywhere there were sharp discussions during budget time, on whether to continue the expense of the major shows. They always seemed important to be at, but usually it was pretty difficult to make a direct correlation to enough actual revenue, to justify the large expense. As the Internet became more prominent, this ROI looked even worse in comparison--as it did for many other "offline" marketing methods, such as traditional direct mail and print advertising.

So are tradeshows now obsolete? Probably not, but many marketing folks might say that they are on the endangered species list. So when, if at all, do traditional trade shows still make sense today? And what should your goals be, if you do decide to invest in a show or two? Let's take a quick look at 4 points relevant to each of these two questions.

4 REASONS IT MAKE SENSE TO GO TO A TRADE SHOW

A CONTRARIAN APPROACH
One of the major enduring tactics of marketing is to "zig when your competitors zag". If you are in a market where a show is still well attended, but vendors are starting to stay home rather than pay for booths, you may have an opportunity. If your competitors aren't there, you have a larger, captive audience of prospects to strut your stuff to. One of the basic tenets of a good marketing program is to find a "communications channel" which isn't too crowded. With trade shows falling out of favor in marketing budgets, there is potential to benefit from a contrarian approach in some markets.

INTRODUCTION INTO A NEW MARKET
This is always one of the strongest reasons to attend a few shows. If you have a brand new company, or your company is entering a market space it hasn't previously participated in, a couple of well-selected shows can be a very good investment. Remember, you only get one chance to make a first impression.

INTRODUCTION OF A NEW PRODUCT
Much like a company entering a new market, a new product introduction is a very traditional reason to exhibit at a trade show. In my opinion, introducing new products at shows has historically been over-estimated as a marketing tactic. Sure, the press is there covering the show, but if 50 other vendors are also announcing new products, your new product might get lost, or at least get less press coverage then if you announced two weeks before or after the show. Remember the comment above about over-crowded communications channel?. In some cases, announcing at a show fits this description. This can still be a very sound marketing tactic--just do careful research and planning to ensure it is a net positive.

IMPORTANCE OF HIGH TOUCH
If you have a product that absolutely requires some hands-on or personal selling before prospects buy, trade shows can be an excellent investment. For example, if the product is quite expensive, or an expert demo sells far more than prospect downloads from your site. I have a software company client at PJM Consulting who is in a market where expert demos are essential; they have grown the company, to a great extent with trade shows, and almost always can demonstrate a profit on their show budgets.

4 GOALS TO ENSURE A HIGH RETURN FROM A TRADE SHOW

PRESS COVERAGE
This is always one of the most important reasons to go to many shows. If it is an important show, the press will be there in full force. You really need to plan PR tactics ahead of time, however, as all of the other exhibitors have the same goal of getting press appointments and coverage. It is CRITICAL to plan far ahead in securing appointments with target editors, and have a "tease" of substantial news to obtain the appointment. Editor's schedules fill up far in advance. Properly planned, the show can pay for itself here by eliminating the need for a dedicated press tour. But if not well planned, you will end up "wasting" your product introduction or other news, resulting in little or no press coverage.

EFFICIENCY OF INDUSTRY NETWORKING
Networking with the other exhibitors is often overlooked by many vendors. The focus is generally solely on customers, and maybe distribution channels. Often many companies with complementary offerings are attending exhibiting, along with a few competitors. This can be a great arena to begin or continue discussions with potential strategic partners. At a minimum, makes sure to set aside some time to walk the show floor, and see who might have synergy with your company. Even if you're pressed for time, shake a few hands and gather some business cards--it can be an excellent setup for future discussions.

LOCAL CUSTOMER VISITS
This is also an area that holds potential to lift your show budget's ROI, which is often overlooked by many exhibitors. You are flying staff to a faraway city--why not go in a couple of days early, and call on a few potential major customers? At a minimum, make sure you get those free show tickets that often go to waste out to local prospects in your database, so they can come to the show for a meeting or demo at your booth.

LOCAL CHANNEL VISITS
In the same vein as visits to customers, it makes a lot of sense to call on current or potential channel partners, once you decide you'll be spending money going to a show in a certain region. Add a couple of days to your trip and visit a few key partners and prospective partners in the area. And make sure to invite them to the show well in advance and supply those free tickets, so you can see many more later at your booth.


SUMMARY
If you just fly to a city, set up your booth, and wait for new customers to flock by to see you--you are likely to be very disappointed in your return on investment. But if you use a tradeshow as a hub for a variety of related activity, adding a couple of key shows into your marketing mix can still bring a very nice ROI. The key is preparation and planning, to make sure your results are optimized. I've outlined a few reasons why it may make sense to exhibit at tradeshows/trade fairs even today, along with some ways to maximize your return. What's your reason for attending tradeshows in the Internet Age? And what concrete results do you hope to achieve? Post a comment to continue this discussion.


Phil Morettini
PJM Consulting
www.pjmconsult.com

Retail Distribution of Software Products

Selling software at retail at one point in time was the "Holy Grail" for consumer, home office and small office software suppliers. That's where the volume was. Everything that a company did starting up was intended to build enough volume to get into a distributor, so they could then pursue shelf space at the major retailers of software.

But oh, how times have changed. The advent of the Internet and wide availability of broadband has made nearly every consumer and small business application downloadable with the click of a mouse, and a major credit card. In the meantime, major sellers of software have dropped like flies (CompUSA, Computer City) or have de-emphasized software in their retail assortment.

PROFITABLE retail distribution of software, which has been a major challenge for software companies dating back more than 20 years, has gotten tougher every year, as the retail distribution pipe shrinks. And even twenty years ago, it was already very tough, for small software companies, in particular. I've even seen a credible authority recently predict that distribution of software through retail outlets will CEASE TO EXIST within five years.

IS RETAIL SOFTWARE DISTRIBUTION DEAD?

So should you forget about retail as a potential distribution channel for your consumer or SMB software application?

First of all, it's my opinion that the near term extinction of retail software distribution is greatly exaggerated. While it has been in decline for a very long time, and will continue to decline, it still has some life left. There is still quite a bit of software sold at retail. There are still some reasons that people buy at retail. And last but not least, nearly every thing in high technology takes more time to "go away" than the pundits predict. People just don't change their habits that quickly, no matter the technological reasons for that change to occur. Among several reasons people still buy at retail:

WHY PEOPLE STILL BUY SOFTWARE AT RETAIL

Impulse - They are in a store looking for something else, and happen upon a product that looks neat or useful. In this respect, software benefits from this "in-store effect", much like any other retail product.
Credibility - Buying software, or any other item over the Internet from some unknown company, is scary for many people. Just the fact that it's in a "touchable" package, and is "blessed" by the retailer stocking it, gives comfort to many, especially the mainstream and late adopter types.
Physical Media - Most folks want a backup copy of the application which they've put out good money for. Sure, you can burn a backup CD on your own. But to some folks that's technologically challenging--and seems like a lot of work to others.
Internet Phobia - There still are folks, more than want to admit it, that just aren't comfortable with the Internet, particularly the ecommerce aspects.

WHEN SHOULD A SOFTWARE VENDOR CONSIDER RETAIL DISTRIBUTION?

So in some cases, software vendors should still give consideration to packaging their products for retail distribution. What are the elements which may make retail still a viable distribution channel for a particular product line?

* A VERY hot product - In one of these rare instances where you've hit a product home run, it's beneficial to get your product in as many channels as possible. When you have a product "selling like hotcakes", retail can be ideal to help you maximize your return on the high demand. Make sure that you've proven that it's a brisk seller via other marketing and distribution methods BEFORE you enter the retail channel, however.
* A well-known brand - Almost nothing helps product sell through retail as much as a well-established brand. There is almost never anyone to "sell" your product in a retail store. You are relying almost soles on the box copy to be your salesman. In this situation, the credibility of a strong brand is often the difference between a customer purchasing, and leaving the box on the shelf.
* A related portfolio of products that can be sold to the same customer. It is very hard to make money on a single product being sold through retail channels. The upfront marketing programs and thin margins make breakeven a huge challenge for a single product company. However, if you can profit indirectly even if you just break even on the actual retail sale, by building your customer list and selling related products to them--that's a huge advantage.
* Add-on services to sell - Much like having a large portfolio of products, a single product vendor can also have a greater chance at profitability if the "retail product" is a front-end to other revenue generating services. Maybe the product leads to subscriptions to an add-on web-based service, or there are custom forms or other tangible supplies that can be sold to users of the software application.

These are a few of the circumstances where I would actually encourage an ISV to consider retail distribution. I want to caution that in the best of circumstances, this channel isn't for the "faint of heart". Startup costs are high, margins are generally lower than other forms of software distribution, and there are substantial inventory issues and risks. There's an old saying in the software business about retail distribution--"the only people who make money at it are the freight companies who ship the inventory back and forth among vendors, distributors and retailers". In short, it's a great place to lose money--if you aren't careful. I highly recommend that you retain an expert to help you through the process, if you are new to retail and decide that it may be appropriate for your products.

There are many more angles to cover on this topic. To name a few, the need for a relationship with a major distributor of software to retailers, what marketing programs to use, the importance of a retail package--and much more. As important as they are, we'll have to leave the detailed mechanics of getting your software into retail distribution (and making a profit!) for a later article.

SUMMARY

So don't dismiss retail distribution of your software applications completely, even in this age of Internet instant gratification. But make sure that you are doing it for the right reasons, with a solid plan for how it will benefit your company. If your company is entering retail for the first time, consider retaining an expert to reduce your risk of failure.

I'd enjoy hearing your own experiences with retail distribution, past and present, as well as your attitude about this channel today. Post a comment so we can all learn from your experience.

Phil Morettini
PJM Consulting
www.pjmconsult.com